ClubRoadster.net banner

Recent content by RFMGraffix

  1. NB2 Miata wire tuck and more

    Roadster Projects
    My office has become parts storage LOL
  2. NB2 Miata wire tuck and more

    Roadster Projects
    Geeze, I need to update this. Did a bunch of track days at the end of the season. Upgraded to Carbotech XP8 pads, swapped the KoyoRad for a mishimoto after the koyo failed and leaked(nothing against Koyo), ordered Garagestar Delrin Bushings and Seat rails, Sabelt GT090's and Sabelt Harnesses...
  3. ISC Suspension coilovers

    Product Reviews
    Copied from the other thread: If I remove them, ISC has a shock dyno in house and can probably get numbers for my specific set. This year saw a couple hundred laps at Thompson Speedway and about 10k miles on the street. 3.5" stroke, I haven't physically measured the droop travel however the...
  4. ISC Suspension coilovers

    Product Reviews
    Hey guys just wanted to give my review on ISC's since there doesn't seem to be a lot of information about them for the miata yet. A little bit of information first. I currently run ISC coil overs on my 2002 SE and have for about 2 seasons now. I work for a shop that deals mainly with GTR's...
  5. NB2 Miata wire tuck and more

    Roadster Projects
    Thank you! Car is somewhat at a stand still due to needing to buy a winter beater. But since my last update I broke the slave autocrossing, replaced that. Installed the Carbotech 1521's, centric premium rotors, goodridge lines, mazda comp mounts, and hella horns. Next step is most likely...
  6. NB2 Miata wire tuck and more

    Roadster Projects
    Thanks for the kind words guys! I really need to post an updated picture with the GS Wiper cowl cover. Couple pictures from the weekend:
  7. NB2 Miata wire tuck and more

    Roadster Projects
    so here's an update with the wheels on: Also installed my FM Stage 1 and 13lb flywheel and miata roadster short shifter as well as a Garagestar rain try cover. Next will be a front lip which should finish up the exterior for now. I'll get some more updated pictures when I can.
  8. NB2 Miata wire tuck and more

    Roadster Projects
    Figured I should update this with whats going on in the next couple of weeks. Rebuilt ISC's are on their way: 10k front 7k rear swift springs, with a shorter rear front spring, and shorter front and rear shafts. 57dr's 15x8 +28 wrapped in 225 toyo R1R's Also ordered a Miata Roadster...
  9. NB2 Miata wire tuck and more

    Roadster Projects
    Thanks man, that was the goal! Also good luck with your '90 it's always fun to see more miatas out at larz.
  10. NB2 Miata wire tuck and more

    Roadster Projects
    Actually ran without for the summer. Huge risk but was diligent about checking fluid levels and keeping an eye on temps. Working with my shops fabrication department on making a coolant/washer reservoir that will sit in the rain tray and run the lines up the fender.
  11. NB2 Miata wire tuck and more

    Roadster Projects
    Mazda parking lol Pre winter De-salting And where she is now, skinny kid at fat camp :D Lots to come in the next 2 months. Special thanks to Lui Rivera/Wankel Works for all his help so far, couldn’t do it without him. Everyone at Kaizen Tuning. Joe Vesci @ T14 Everyone at ISC Ken @...
  12. NB2 Miata wire tuck and more

    Roadster Projects
    Slapped the stock header back on, because. Back in Looks perfect VC and New oil cap New hoses and almost done New lighting installed Skunk2 vs OEM Lui’s vs mine Electrical troubles, Fuel harness was arching, didn’t even touch it -_- All went well for a bit Got new fronts from...
  13. NB2 Miata wire tuck and more

    Roadster Projects
    Not clean enough Relays and wires set Test 2, still doenst fit Wires behind the headlight Closeup UGH header was ugly What a mess haha ISC Test fit New end links Front suspension Running the main harness Stock ignition setup New head studs, and villa doom Getting there...
  14. NB2 Miata wire tuck and more

    Roadster Projects
    Well I figured since the forum is up, I should post up a build thread for my miata. Up until this point here is my mod list: Engine: Custom cold side intake Tomei Heat wrapped header(because why not?) Skunk2 upgraded throttle body GarageStar oil cap GarageStar Bolt kit GarageStar Radiator...
  15. What does your engine bay look like?

    Engine & Transmission
    Finally a more legit picture of my bay
Top