ClubRoadster.net banner

Search results

1-20 of 37 Results
Advanced Search
  1. 1.73L sleeved B6ZE

    Engine & Transmission
    im so sorry to say, but i do not :( i currently run the service area of Montu Motors:
  2. 1.73L sleeved B6ZE

    Engine & Transmission
    <3
  3. 1.73L sleeved B6ZE

    Engine & Transmission
    hahaha. please don't judge me for my heterosexual ways! i promise to keep my flamboyantly straight comments, mostly, to myself. i mean, me and spitefulcheerio had that one time together....but it was just one time i swear!
  4. 1.73L sleeved B6ZE

    Engine & Transmission
    i detect, and appreciate, you sarcasm. We should hang out. /nohomo
  5. 1.73L sleeved B6ZE

    Engine & Transmission
    GOOD CALL. Was so worried about all the other aspects, completely forgot about that option! good call! I've install Hardblok brand into multiple BBCs, and SBCs. effective. please see the following two quotes: and get out of my thread. please and thank you.
  6. 1.73L sleeved B6ZE

    Engine & Transmission
    http://www.miataroadster.com/maruha-motors/maruha-motors-head-gaskets/mmmar0000010/i-533249.aspx apparently Maruha makes a 81mm HG, available 0.8m or 1.0mm thickness! the 0.8 would bump me up to about 12.2:1 static!
  7. 1.73L sleeved B6ZE

    Engine & Transmission
    Sorry for the lack of updates onthis, but my work has kept me excessively busy overthe last year. But there is good news...there is a 91 model miata on its way to me for payment on another miata engine swap job. as soon as that one is torn down, I'll post updates on reassembly and head flow data...
  8. 1.73L sleeved B6ZE

    Engine & Transmission
    :oops: i cant believe i didnt check in on that...i guess assumed they did. research time! thanks dude! USDM B16A1, PR3 81mm.
  9. 1.73L sleeved B6ZE

    Engine & Transmission
    customer dropped off my new-to-me pistons and rods out of his usdm honda!
  10. 1.73L sleeved B6ZE

    Engine & Transmission
    thats kinda the thought with this whole project!
  11. 1.73L sleeved B6ZE

    Engine & Transmission
    i lookedthat up, and iirc, the B6ze is 90mm bore spacing and the b16A is 91mm. that miiight be doable.
  12. 1.73L sleeved B6ZE

    Engine & Transmission
    :eek: :eek: :eek: yes....and..... Yes. going to make measurements now.
  13. 1.73L sleeved B6ZE

    Engine & Transmission
    only becuase you ruphied the hell out of my drinks last night!! we shall be in touch! just cover the cost of the parts that went into it, and its yours. ETA 3-4 months from now.
  14. 1.73L sleeved B6ZE

    Engine & Transmission
    Update!! In a bit of seemingly destined fate, one of my machine customers offered me a stock B6 long block in exchange for some custom head work, and later that same day, a Honda buddy of mine mentioned he has a set of usdm B16A1rods and pistons with a new set of rings. This is going to...
  15. 1.73L sleeved B6ZE

    Engine & Transmission
    hehe, you said BJ.... :giggity: yes, same big end, which would use stock size mazda B6 bearings.
  16. 1.73L sleeved B6ZE

    Engine & Transmission
    you not in tally anymore?
  17. 1.73L sleeved B6ZE

    Engine & Transmission
    thanks for all the support guys! as soon as i get off my ass (aka work slows down a bit), i'll go pull the donor engine from the wrecked chassis its in...unless someone wants to ship a B6 block to Tallahassee, lol. and then the fun will begin!
  18. 1.73L sleeved B6ZE

    Engine & Transmission
    exactly my thoughts. they may or may not vary in compression height, but i'll determine that once i crunch a few more numbers.
  19. 1.73L sleeved B6ZE

    Engine & Transmission
    hooooly ****. he says that he's cut apart a block to analyze wall thickness, and "theres alot there"...i dont see how thats possible, but if he's run 81.5mm boosted to 9k rpm, then i think im gonna be okay.
  20. 1.73L sleeved B6ZE

    Engine & Transmission
    me too, lol.
1-20 of 37 Results
Top