ClubRoadster.net banner

1 - 11 of 11 Posts

·
BACK BY POPULAR DEMAND
Joined
·
5,096 Posts
Ha ha, same hp from my Protege at the same psi.


Is that depressing?
 

·
Banned
Joined
·
439 Posts
Discussion Starter #7
Nice.. Sounds like you have everything needed for 8psi! :)
Yeah, I need to install my IC and Begi AFPR so I can lean out the fuel and get more on top. Maybe 150-155whp+ at the same psi, then 1.8 injectors, and shoot for 10-12 psi.

I already have 450cc inj for when I get a standalone.
 

·
BACK BY POPULAR DEMAND
Joined
·
5,096 Posts

·
Banned
Joined
·
439 Posts
Discussion Starter #11
You don't use an AFPR or high flow fuel pump?

What does the JR injector controller do anyways?
I am running a Walbro 255 pump. I have a Begi 2025 in the garage, awaiting install. Plus MBC and IC should be here Tues and Wed. I just need to eBay me some 2.5" pipes and fab up my FMIC. I am thinking about dropping some 1.8 injectors in, since the 450s I have (also in the garage) probably won't idle.

The JR Inj Controller increases injector pulse length based on boost. It comes with the JR Big Boost SC Kit, which lets it run 8psi on the 1.6 injectors. So, with a FMIC, 265s (1.8 inj), and the AFPR, I am thinking I could run 10-12 psi without going over 90psi on the fuel pressure.
 
1 - 11 of 11 Posts
Top