ClubRoadster.net banner

1 - 6 of 6 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter · #1 ·
i need help on putting on the starter for my 1.8 to a 1.6L chassis swap, please. there is no room for me to put my hands under the intake manifold .. =\ 99% done with the swappppppppppppppppppppppp omgg =\

p.s ( noah, help me please =D or anybody else!! )
thanks Will =D
 

·
Mufasa in Training
Joined
·
33,632 Posts
Pull the intake manifold. That's the only way I can think of to do it. It's 9 bolts, but you're going to have to pull the fuel rail as well.

The only other option I can think of is to maybe try to reach around through the wheelwell?
 

·
Brah.
Joined
·
7,484 Posts
dang you should not have any issues with this...i was able to get under the intake manifold when installing mine.

also pm'ed yah about this....
 

·
Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
i ran into another problem, are there suppose to be extra wires/switches/plugs/sensors near the CAS? >:\ .. and what lower radiator hose am i suppose to use for this 1.8 swap..
IT'S SO COMPLICATING...............!!!!!!!!! dang help !!
 

·
Brah.
Joined
·
7,484 Posts
take some pictures we can help you with that.
you have some plugs under the cas
use 1.8L lower radiator hose
 
1 - 6 of 6 Posts
Top