[billy.]

Hey guys i would like to pick up a set of raw center finshed 15x10 Diamond Racing Wheels for some fun spare wheels.

I wanted to either get a 6 or 6.25 backspace which equals a +12 and +18 offset.

This is equal to a 15x8 -6 and -12 i think. Yes i am too on a 15x8 0 offset setup as well.

With a 195/45 tire i figure the stretch will clear my current fender work and give a nice little poke depending on which backspace i decide.

Only concern, will the wheel clear everything? Yes the ar is really low as well.

Thanks for the help guys.

 

[GreenYellow]

I wanted to either get a 6 or 6.25 backspace which equals a +12 and +18 offset.

Wouldn't this be a +25 and +31 offset?

Edit: Should clear. 6" BS would be about the same as the new 15x10 +25 6UL, or the old 15x9 +36 6UL.

Edit 2: He knows more than me
vvv

 

[terry pham]

If you are getting 15x10, I would highly recommend going with 5.5" backspacing.

 

[billy.]

haha its cool thanks for the help man, they should be fine if 15x10 6UL's will clear these should to, an no im good on the 5.5 backspacing haha but thanks man.

 

[Beef Supreme]

Wait. You are putting 195/45 on a 15x10? 0.0

 

[Adrian]

going for that breezy superlite fitment

 

[kev]

FWIW, I had a set of 15x10 diamond wheels with 6.5" of backspace on my 99 miata. I used a 1/4" spacer on the front wheels.

With 275/35/15 tires, I rubbed on the inside rear lightly. On the front, the front swaybar and springs (from my koni/gc setup) had slight rubbing at full lock).

 

[billy.]

Yes haha and thanks kev.

 

[ThaiT]

15x10+12 clear back for sure. thats what im runnng. cant help you on the front as im running 15x8+12

 

[billy.]

Post a pic of your rear fitment.