ClubRoadster.net banner

1 - 18 of 18 Posts

·
Registered
Joined
·
873 Posts
Discussion Starter #1
$12000cdn OBO in Richmond Hill



Engine / tranny stuff:
Wiseco forged turbo piston with 9:1 compression
Jackson Racing M45 Supercharger
Jackson Racing water to air intercooler
Moss motor pulley tensioner
small nose pulley
Track dog racing large pulley overlay
custom headlight intake duck (stock head light included)
DDM CAI
Jackson Racing ignition wires
Flyin Miata clutch and lightweight flywheel (http://flyinmiata.com/index.php?deptid=&parentid=&stocknumber=08-36000 10.30)
Megasquirt 2 custom ECU
Devils own water methanol injection stage 1 kit


Exhaust stuff
OBX header
RoadsterSport Midpipe with Catalytic Converter and Resonator from Good-Win-Racing
Jackson Racing Muffler

Suspension / wheel / brake stuff
Suspension Tower bar
Jackson Racing front and rear sway bar
Tein S-tech springs
KYB suspension
ALT lite-speed 16” rims with low-profile tires used for 2 summer… got a lot of life.
Brembo Cross slotted drilled rotor
Roll bar

Interior stuff
Momo T2000 driver seat (stock seats included with a pair of brand new factory seat cover not installed)
Momo Floor mats with metal plates.
Momo Steering wheel
Push start button
½ din Glow shift gauges panel (Boost, Air/Fuel, oil pressure), shift light
Pioneer head unit (plays MP3)
JDM cluster
Mazdaspeed pedals
Weighted shifter that sits really low
02 center console
Passenger airbag off switch relocated with the JDM storage bin
Factory wind blocker

Exterior stuff
GV style body with extra front bumper
Chaser Hood
JDM mazdaspeed spoiler
Red out tail lights
S2000 style antenna
6000K slim digital HID with high-low beam
GV eyelids from R-speed
Advance Racing corner plastic with duck replacing the factory triangle glass
 

Attachments

·
Deez Nuts
Joined
·
1,596 Posts
Any extra work to fit the OBX headers with your supercharger? I have a MP62 and looking for header that will work. Sick NB and GLWS.
 

·
Registered
Joined
·
873 Posts
Discussion Starter #3
a member here, SmokeSR, told me that there are 2 obx header and one of them works. He is running a MP62 on a 10AE.

or you can just buy my miata and take all my parts! .
 

·
Registered
Joined
·
1,027 Posts
I recommend that you buy GV's car, take the header and have a tonne of spare parts =D

I will be putting on a header with my MP62 before Spring time. I don't see any issues with the OBX, but can't confirm till it's on. One header that will for sure work is the old RB header, but they're getting harder and harder to find.
 

·
Registered
Joined
·
489 Posts
Good looking car! Good luck with the sale.

Any extra work to fit the OBX headers with your supercharger? I have a MP62 and looking for header that will work. Sick NB and GLWS.
Just in reference to this... Not sure about the OBX, but I have a MP62 and have the Jackson Racing 4-2-1 header and have no issues. Although I know the header is more expensive, just thought id pass that on.
 

·
Registered
Joined
·
1,027 Posts
Good looking car! Good luck with the sale.



Just in reference to this... Not sure about the OBX, but I have a MP62 and have the Jackson Racing 4-2-1 header and have no issues. Although I know the header is more expensive, just thought id pass that on.
Doesn't the JR header have a 2" exit? I recall that was the reason I passed on it.

Someone buy this car!
 

·
Registered
Joined
·
1,019 Posts
sad day...
 

·
Registered
Joined
·
371 Posts
A jr header will/should work with m45/mp62
 

·
Registered
Joined
·
873 Posts
Discussion Starter #11
i am also willing to trade for lower milage NB2
 

·
Registered
Joined
·
1,027 Posts
What?? If you would trade for a lower mileage NB2, just keep your car!! It drives so well!

And 2" header is on the small side for an MP62. I want 2.25" minimum and the OBX is 2.25" at the end collector. GV's car also sounds awesome...I believe it's due to the header because all my other piping is done, but I'm on a NB2 header, but my car doesn't sound as good as GV's.
 

·
Registered
Joined
·
873 Posts
Discussion Starter #13
What?? If you would trade for a lower mileage NB2, just keep your car!! It drives so well!

And 2" header is on the small side for an MP62. I want 2.25" minimum and the OBX is 2.25" at the end collector. GV's car also sounds awesome...I believe it's due to the header because all my other piping is done, but I'm on a NB2 header, but my car doesn't sound as good as GV's.
o yeah. i forgot that you've driven my car.
 

·
Registered
Joined
·
1,027 Posts
220k on the body. 10k on the motor since rebuild (done in 2010). It's a well sorted car that feels very strong. I drove it briefly at the end of this Summer.
 

·
Registered
Joined
·
873 Posts
Discussion Starter #16
might part out...
 

·
Supporting Member
Joined
·
3,007 Posts
I am ready to buy the eyelids


I take that back. its a nb1 not a nb2
 
1 - 18 of 18 Posts
Top