ClubRoadster.net banner

1 - 13 of 13 Posts

·
Registered
Joined
·
351 Posts
Discussion Starter #1 (Edited)
SOLD, SORRY GUYS!

I dont know what kind they are, they're comfy, will fit someone less than a '34 waist. One of the seats has some side wear from a seatbelt. No sliders, bolts on the bottom. They came out of a NA miata, was told they'd attach to the oem slider perfectly, but it doesnt. Turns out the dude did custom work on his oem slider to make them fit perfect, but otherwise they're 1/4 inch off, so you'll need sliders. Was going to put one in and sell the other, but I can't do custom work, and have a friend thats upgrading his seat, so Ill get that one.









 

·
Registered
Joined
·
1,339 Posts
Good prices, doubt that would last very long.
 

·
Registered
Joined
·
351 Posts
Discussion Starter #5
Heres what I mean.

The stock sliders are about 1/4 of an inch too long. The length of the bucket holes from bolt to bolt is about 11 and 7/8 inches, while the stock sliders are around 12 1/8 inches.

If the first bolt areas match, heres what the other end looks like



I think the previous owner bent his slider at one end, so the seat would fit and he could still slide the rest of the seat...
 

·
Registered
Joined
·
1,571 Posts
Looks like you could have drilled a closer hole in the slider. Would that have worked? I would have bought them but I'm too slow. :(
 
1 - 13 of 13 Posts
Top