ClubRoadster.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter #1
Does anyone know of a good way to pull your fenders? I just got in the the GB Sportmax for some 16x8 002 and need to pull my fenders in preparation. They are already rolled. I was looking through the album at some people with pulled fenders and it makes the car look much better.
 

·
Supporting Member
Joined
·
12,259 Posts
I believe you just keep working the fender with the roller tool by applying more force and moving higher and higher up to gradually stretch the metal further outwards. Don't forget to go slow and to use heat to warm the metal and the paint so that it doesn't crack.
 

·
Registered
Joined
·
332 Posts
i used abs pipe on my friends 240. i heated up the edge with a heating gun and also heated up where i wanted the pull at...then we applied pressure while he rolled back his car...the fender looks as good as a fender roller can do it.. but make sure the fender is really hot...so you dont crack the paint
 
1 - 3 of 3 Posts
Top