ClubRoadster.net banner

1 - 8 of 8 Posts

·
Miata Master
Joined
·
2,138 Posts
Discussion Starter #1
Starting Monday September 19, 2011

25% OFF ALL USED PARTS
IN STOCK OR IN COMING


If we have it, its on sale.
Motors, Transmissions, diffs etc

I have quite a few goodies in stock and ready to go.
We ship daily or you can pick up parts at the shop.
Call or email with your requests!
1-866-296-1100
[email protected]

Thanks Steve
 

·
Registered
Joined
·
1,290 Posts
Steve

I need two good working power window regulators and motors and window switch. Basically everything needed to make manual window car power.

Please pm prices.
 

·
Miata Master
Joined
·
2,138 Posts
Discussion Starter #4
Steve

I need two good working power window regulators and motors and window switch. Basically everything needed to make manual window car power.

Please pm prices.
Is your car prewired? provision for window switch there? harnesses into the doors? Lemme know and i will see what I have
 

·
Registered
Joined
·
1,290 Posts
Is your car prewired? provision for window switch there? harnesses into the doors? Lemme know and i will see what I have
Harness in center console is there for switch, yes. Also provision for window switch is there, yes.

Don't know the answer to the rest of your questions :fp:

Appreciate the help.
 

·
<3s Malaking Puwit.
Joined
·
581 Posts
Harness in center console is there for switch, yes. Also provision for window switch is there, yes.

Don't know the answer to the rest of your questions :fp:

Appreciate the help.
Manual to Power Window Conversion!

Since you have a 95, yours should have the harness to convert to power windows already. Just pull off the door panel and look for a harness thats clipped to the door near one of the bigger holes.
Should look like this.

If not, you'll have to do exactly what was done in the thread I mentioned.
 

·
Registered
Joined
·
1,290 Posts
Manual to Power Window Conversion!

Since you have a 95, yours should have the harness to convert to power windows already. Just pull off the door panel and look for a harness thats clipped to the door near one of the bigger holes.
Should look like this.

If not, you'll have to do exactly what was done in the thread I mentioned.
Thanks Dominic, I will check the doors. :)
 
1 - 8 of 8 Posts
Top