ClubRoadster.net banner
1 - 20 of 28 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 · (Edited)
Guys its a sad day but I think I need to sell the Miata. I just got a job out in CA and it will not pass the CA emission requirements. So here is the deal.

1999 Mazda Miata 10th Anniversary Edition with hard top painted to match

Just at 100k miles

Modifications:

XIDA-S coilovers from 949racing - Spring rates are 700in/lbs front 400in/lbs rear
http://949racing.com/xida-scoiloversmiata.aspx
Maxim Racing 4-2-1 Headers - These are some of the best crafted headers I have ever seen
FM 2.25in Mid-Pipe with resonator and high flow cat
Racing Beat Power-Pulse Cat-Back Exhaust
FIDANZA Lightweight Aluminum Flywheel
EXEDY Stock Replacement Clutch replaced at around 86k miles
Racing Beat 1.25" tubular front sway bar and frame mount point reinforcement kit
Hard Dog M2 Sport Roll Bar - Previous owner had it professionally installed works with hard top and soft top.
OMP Drivers Seat
Not installed FM Frame Rails

The car also comes with two wheel packages.
15x8 6uls wrapped in 225/50/15 toyo proxy 4s. Tires are almost brand new wheels could use repainting
15x9 6uls wrapped in 225/45/15 Hankook z214 c71 they are about a year or two old and have only 5 or 6 auto-xs on them. Wheels are in pretty much prefect condition.

The Bad

The door speakers have gone bad. I replaced the passenger side door panel with a custom panel. I removed the soft top, but I still have it and it is great condition just might need a new rain rail.

I will clean car and try and get some pictures up sometime this weekend.

Asking $12,000 obo

Car is located in Richmond, VA











 

·
Registered
Joined
·
90 Posts
You interested in selling off just the C71's and 6UL's?
 

·
Registered
Joined
·
55 Posts
Dude, if those are the only modifications your car has you're fine. Either find a smog hook up like the guy a couple post above me said, or find a stock header and cat and smog the damn thing.

There's hella money in that car, don't let it go!
 

·
Registered
Joined
·
121 Posts
Discussion Starter · #8 ·
Well I also need the money to facilitate the move. I would love to keep it but I also have a new baby a '93 RX-7

Here are the photos.

Sorry they are not the best (Car isn't as clean as I would like) I had to take a short notice trip because my Grandma had a heart attack and I have been packing. I will add them to the first post as well

Also for those in state that don't require a front licence plate. I have not drilled holes in the bumper as you can see.
 

Attachments

·
Registered
Joined
·
121 Posts
Discussion Starter · #11 ·
this guy is a narc btw
This is why I will not be doing this I am new out there and I will not be bring flack to this board or anywhere else by preforming illegal acts.

Wow, very nice 10AE ya got there, hope it goes to a good home! GLWS!
Thanks man! I really don't want to see the car. I very taken a lot of time trying to make it perfect. In fact its taken 1st or 2nd at the last 12 auto-x I have attended I am sad to see it go.
 

·
Registered
Joined
·
116 Posts
Free bump for a good looking car, GLWS and for the front plate dont drill holes in the front bumper there is a bracket that mounts in the opening where the air goes through for the radiator, its on the upper part the front bumper opening.
 

·
Registered
Joined
·
121 Posts
Discussion Starter · #13 ·
Free bump for a good looking car, GLWS and for the front plate dont drill holes in the front bumper there is a bracket that mounts in the opening where the air goes through for the radiator, its on the upper part the front bumper opening.
Trying to avoid doing that beatrush makes a nice bracket that avoid drilling holes
 

·
Registered
Joined
·
408 Posts
heh, I'm also in Mountain View. I've seen a handful of 10AE's around but not yours. I've got an emerald green 99 with an extra tall rollbar

unless... have you taken the Mazda stickers off? I know ive seen a 10AE with a hardtop around
 
1 - 20 of 28 Posts
Top