ClubRoadster.net banner
1 - 17 of 17 Posts

·
Registered
Joined
·
930 Posts
Discussion Starter · #1 ·
over all its a pretty clean wheel but has one spot where the stitching is coming apart




i tried to get a picture of the sticking but this was the best i could get


comes with hub and everything but will need some modifying to make it fit. i can do this for a price if needed. looking to get $130
 

·
Registered
Joined
·
177 Posts
nice~fit NA6??
 

·
Registered
Joined
·
930 Posts
Discussion Starter · #6 ·
the hub needs to be ground out so the wires can fit through to the horn. uk/jdm cars have a different clock spring setup. shouldn't take more than 10mins with a carbide cutter.
 

·
Registered
Joined
·
930 Posts
Discussion Starter · #12 ·
the other steering wheels iv shipped cost about $18 but if its less i can refund the difference if more, ill eat the cost.
 

·
Registered
Joined
·
930 Posts
Discussion Starter · #14 ·
only have to unbolt the old wheel cut the connector and put a spade on the horn wire and possibly cut the zip tie and plastic on the clock and your good to go. its nardi hub and wheel :)
 
1 - 17 of 17 Posts
Top