ClubRoadster.net banner

1 - 20 of 43 Posts

·
Registered
Joined
·
659 Posts
Discussion Starter #1 (Edited)
I need a truck and will be getting out of toying with cars for a while. Don't mind the prices I was just trying to see what a part out might bring me. The total comes out to $13,025.

I currently daily drive the car, but its not the most comfortable thing in the world to drive. The MMR diff bushings and RX7 rear housing rear make for a pretty noisy drivetrain. I do have a stock miata rear housing with stock bushings. I also have some of the interior, black carpet, some tan panels etc. The package tray I have nothing for.

$8,500obo
Car:
1999 Mazda Miata 128k Miles $5,000
Car was originally an automatic
Not Sure of the Package
Car Has ABS
Power Windows
Cold A/C

Body:
2001 Front Face Lift
Large OEM Side Skirts and Front Valance
SlickAuto APR Carbon Mirrors $200
ChaserAero Carbon Fiber Scoot Hood $300
ChaserAero Carbon Fiber Hardtop $900
30mmm ZG Flares
Shaved Antenna
Paint by Clay Deen Satin Blue Metallic

Drivetrain:
1999 Automatic 1.8 BP (Stock)
2003 6 Speed $400
2003 Torsen Fuji Spring Type Differential $400
MMR Bushings in N/A Rx7 Housing
Fidanza 9lb Flywheel
Spec Stage 3+ Clutch (2k miles)

Performance:
VF Engineering Vortech Supercharger Kit $2,500
Stage II 8psi with Race By-Pass Valve
Also have the 6psi Pulley and a spare crank pulley
Custom Over the Radiator FMIC Setup
CXRacing Aluminum Radiator $100
Dual 10" Electric Fans with Relay and Toggle Switch
Raceland Header
Stock Midpipe, have the 2.5" midpipe, it wasn't enjoyable daily driving.
2.5" Rear Racing Muffler

Chassis, Suspension, & Brakes
2003 Rear Subframe Brace
Tein Flex Coilovers $900
TCS Rear Upper Camber Arms $100
MTuned Brake Uprade Front 11" Corrado and Rear 10.9" Miata Sport Brake $200
Axxis Ultimate Pads, also have a set of Hawk HPS Pads Barely Used
Seeltuned Inner Tie Rods $75
Megan Outter Heim Tie Rod Ends $125
DCW Modified Knuckles (for quicker steering and added angle) $175
DCW 1 5/8" DOM Roll Bar
New Wheel Bearings

Wheels & Tires:
15x9 +36 949 Racing 6ULs Nickel $600
225/45zr15 Hankook RS3
33mm Bolt On Spacers $150

Interior:
Stripped(car was tan, but I have some of the plastics and black carpet)
Amp in the Trunk with Jensen JPORT Mp3 Jack in the center console
Couple 5 1/4" Pioneer sitting the on the package tray
8" Bazooka Woofer in Trunk
NRG Slim Hub and Quick Release $125
Sparco Versoce Steering Wheel 330mm $125
Autometer Sport Comp Boost and Water Temp $50
AEM Eugo Wideband $150
Red Megan Racing Pro Series Carbon Fiber Seats $300
Driverside OMP 4 Point Seatbelt
Bride Rails and Slides $200












The day I brought the car home I put sportmax wheels and bc coilovers on it, this was her in all her auto glory.
 

·
Deez Nuts
Joined
·
1,596 Posts
Was it that bad with a 2.5" midpipe and 2.5" exhaust? My midpipe is a roadster sport 2.5 but my exhaust is a 2.3" exhaust. I'm waiting for my supercharger to get here but I have wondering about bad the noise is goning to be. Nice car GLWS.
 

·
I wanna go fast
Joined
·
2,781 Posts
That's one sexy car GLWS. I like the way the flares flow with the skirts.
 

·
Registered
Joined
·
141 Posts
Nice looking car. Love the 2 tone look of the blue and CF.

Wish you were parting it out with those prices.
I get all excited seeing things I want for prices I can afford.XD

Let me know if you part, I would take that wheel/hub/QR combo.
 

·
Registered
Joined
·
659 Posts
Discussion Starter #12
Yeah Skinny I'm completely sick of cars as you can imagine. I'm selling all 4 I have now and getting myself one nice diesel truck, something around 100k miles, crew cab, 2wd. I did finally get those sweet front wheels Skinny so I have the full set of Gartemiers 18x13, 18x11, but nothing they will fit on.

I really do not want to part the car out, I am however pretty motivated to sell it. It really just need some tidying up.

I sold the Miros a long time ago, but wish I had them now, they would be perfect daily wheels.

I am part owner in a fabrication shop where we do roll cages and such, do you guys think putting a full cage in this thing would hurt the chances of selling?
 

·
Whiskey makes me Frisky
Joined
·
4,545 Posts
the full set of Gartemiers 18x13, 18x11, but nothing they will fit on.
Pete still have that LS?

You need to find someone with a truck, that wants a weekend toy.
 

·
Supporting Member
Joined
·
3,007 Posts
This is one nice car. It looks and feels amazing. This guy is legit and fun to drink beers with. Oh how I wish I can have his car.
 

·
Registered
Joined
·
659 Posts
Discussion Starter #15
Pretty motivated to sell this ol' girl, I found the truck I want and need some money for down payment. I will consider trades plus cash as well.
 

·
Registered
Joined
·
659 Posts
Discussion Starter #16
Just got off the phone with the dealership and working on getting a loan for a 2006 Dodge 2500 Diesel.

If you're interested in this and serious about it give me a call, so we can work out details.

352-427-0355
 

·
Registered
Joined
·
659 Posts
Discussion Starter #20
Price on Hood?

Carbon or just frp. Asking so I can see what it would take to fix the cuts in it
Asking $300 Its Carbon Fiber, can't you read my post?

I would not recommend trying to fix where I cut for intercooler piping, and you probably wouldn't notice it anyway.
 
1 - 20 of 43 Posts
Top