ClubRoadster.net banner

1 - 5 of 5 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
Hello everyone, this is my first post here.:|
I have a 92 Miata, I'm gonna replace the exhaust manifold in order to get the smog pass(the one right now is a aftermarket so it will not pass the smog).
I just found that there are two different styles...

http://parts.arlingtonmazda.com/products/GASKET,EXH.-MANIFOLD-(B695%2d13%2d460A).html

http://parts.arlingtonmazda.com/products/GASKET,IN.-MANIFOLD-(B61P%2d13%2d111).html

What's the different between those two? Do I need to order both or just one?
Thank you so much:D
 

·
Registered
Joined
·
26 Posts
Discussion Starter #3
The second one is the intake manifold gasket. The first one is the exhaust...
So I only need the first one then....but Miata takes one exhaust gasket or two?
I talked to dealer today and they said it needs two of them?:dunno:
 

·
Mostly Harmless
Joined
·
1,540 Posts
Well, there's the gasket that goes between the head and manifold. Then you've also got a gasket between the manifold and down pipe (IIRC), then one more between the downpipe and cat.


sent with two turntables and a microphone
 

·
Registered
Joined
·
26 Posts
Discussion Starter #5
Well, there's the gasket that goes between the head and manifold. Then you've also got a gasket between the manifold and down pipe (IIRC), then one more between the downpipe and cat.


sent with two turntables and a microphone
I got it. Thanks:mrgreen:
 
1 - 5 of 5 Posts
Top