Joined
·
1 Posts
I hollowed out my catalytic converter, and I was wondering if anyone would think it would sound better to change the stock muffler to a Glasspack. It's a 1995 eclipse.
glasspack on an eclipse?
1 - 6 of 6 Posts
Joined
·
2,096 Posts
It'll sound great, and everyone around you will really appreciate the sporty, refined tone.
Joined
·
6,677 Posts
It will sound like a v8 and get you endless female attention. Go for it and report back. Expect to be pulled over by your local friendly policeman who just wants to tell you how much he appreciates your throaty sports car.
Joined
·
2,096 Posts
what if I put a clubroadster on a club3g with a glasspack.
Joined
·
226 Posts
What would sound even better is a "cannon" style exhaust. They're super cheap on ebay. The larger the better.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
California Delete
ExhaustA friend of mine just picked up a 1999 California car. It's now throwing a code suggesting the front catalytic converter is toast. We are up in Canada and (obviously) not subject to the California CARB stuff - how do we go about deleting all of it so that the car becomes a non-CARB spec? What...- 11
- 424
-
Raceland header gasket
ExhaustWhat gasket do I use between the header and cat back? The stock exhaust has that ring gasket and the header does not it leaks really bad- 2
- 2K
-
donnyg20 · updated
-
1.6 Exhaust manifold
ExhaustHi guys
Are there any differences between different 1.6 NA exhaust manifolds?
Ie are all manifolds (OEM, JDM, etc) made of the same metal and do they all have the same bore size?
I plan on grinding/ removing the internal welds to increase flow.
Let me break down the question...- 6
- 390
-
Exhaust size
ExhaustHi guys. Does anyone know or have a formula for calculating the optimum exhaust size? I’m talking exhaust I.D Power gained and just the right back pressure. (There are arguments on whether back pressure is good or bad also) What size ID against the amount of horse power you’re chucking...- 74
- 2K
-
Replace or reuse old exhaust manifold studs?
ExhaustShould these studs be cleaned and reused, or replaced? If replaced, which do you guys recommend?- 2
- 354
Are there any differences between different 1.6 NA exhaust manifolds?
Ie are all manifolds (OEM, JDM, etc) made of the same metal and do they all have the same bore size?
I plan on grinding/ removing the internal welds to increase flow.
Let me break down the question...
Join now to ask and comment!