ClubRoadster.net banner

1 - 9 of 9 Posts

·
Registered
Joined
·
347 Posts
Discussion Starter #1
I've tried searching on google and on several forums but haven't found a clear answer.. Does anyone know if the stock recaros off an EVO 8 or 9 will fit into an NA without bolting it directly to the floor?

If not, what are some good reclineable aftermarket seats that would fit with a rollbar and still retain adjustability?

Thanks in advance!
 

·
Registered
Joined
·
460 Posts
Shorter answer...Yes, I've seen it and they look spectacular. The only downside is the place you higher than stock, so unless you are small in stature, the broomstick test maybe difficult with these.
 

·
Registered
Joined
·
487 Posts
It's a very large seat. Fabricate a custom bracket. Most likely lose the ability to slide forward or back. You won't be able to operate the seat recline b/c the dial is wedged next to the body. You'll have to cut into the door panel. You won't be able to put the seat all the way back b/c it will interfere with the seatbelt post.
 

·
Official Armchair Racer
Joined
·
14,399 Posts
It's a very large seat. Fabricate a custom bracket. Most likely lose the ability to slide forward or back. You won't be able to operate the seat recline b/c the dial is wedged next to the body. You'll have to cut into the door panel. You won't be able to put the seat all the way back b/c it will interfere with the seatbelt post.
Other than that it will fit great!
 
1 - 9 of 9 Posts
Top