ClubRoadster.net banner

1 - 5 of 5 Posts

·
CR.net Supporter
Joined
·
350 Posts
Discussion Starter #1
Have seen a few cars now with rolled arches has anyone got any links/pictures/tutorials on how to do this thanks
colin
 

·
Registered
Joined
·
13 Posts
I think you call the arch above the wheels fenders in the US?
There are some great pictures of cars mainly in the US that look wide because the arches have been 'rolled' or pulled out (?).
 

·
Registered
Joined
·
720 Posts
i had my fenders rolled but when i lowered my car more the tires would still rub so last night i pulled my fenders out a bit and now everything is fine

i used a hairdryer and a wooden pole
i used the spare jack to lift the car a bit (tire still on ground) until i could barely fit the wooden pole between the tire and fender,
then i heated up the area i was gonna work on with the hairdryer,
when the fender was hot enough i slowly pushed down on the wooden pole which inturn pulled the fender outwards
i started from one side and worked my way to the other side of the fender
 

·
Registered
Joined
·
13 Posts
That's excellent. Thanks clshrckr =D>
 
1 - 5 of 5 Posts
Top