ClubRoadster.net banner

1 - 10 of 10 Posts

·
Senior Member
Joined
·
4,296 Posts
Discussion Starter #1
hey guys , im sure some you know better than i ,
So whats the deal with using adapters, for the 4x100 to 4x114.3, to fit the Hachi-style wheels.all the sick old school wheels come in this bolt pattern. has anyone had any luck with them? whats the down side?
i have read a little on them from various forums, but want to hear more. its so hard to find a set of wheels in 4x100. all the good stuff is 4x114.3
i want to rock some longchamps.
 

·
Registered
Joined
·
976 Posts
down side.. you can only fit small (as in width and offset) 114.3 wheels.. if you want to stay flush


all the adapters i have seen are 20mm +


my buddy Frank running a 100-->114.3 adapter

wheel specs are 14x7 +0



look how much it stuck out hahah
 

·
Registered
Joined
·
218 Posts
Yeah that is why i took them off, but the car handled a lot better when it's sitting that wide, but deffinetely not worth it. What you could do is get the 4x114.3 wheels and just have them redrilled.
 

·
Registered
Joined
·
33 Posts
i know this thread is old but didnt want to make a new thread.

So i found some 14x7 longchamps in 4x114.3 and some 1" adapters.

will these stick out and will i need fenders?
 

·
Closed Shell Syndrome
Joined
·
7,676 Posts
I know there's a Fitment Thread, but I'm too busy playing with my, as of yet, undeveloped willy.

So I decided to create possibly the oldest necro-bump this site has ever seen.

Please **** on me.
FTFY. :ibtl:
 
1 - 10 of 10 Posts
Top