as the title states is there any weight savings over the stock exhaust over an aftermarket one. now i'm not talking about titaninum ones because i know it's super light. But for the majority of the exhausts, how much lighter is it over the stock one? i find that my stock one is nice and not too ear jarring and i like it but if i can save a few pounds i wouldn't mind getting something lighter.
stock exhuast vs aftermarket weight savings
1 - 4 of 4 Posts
Joined
·
188 Posts
yup fellow enthuza XR here too
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
California Delete
ExhaustA friend of mine just picked up a 1999 California car. It's now throwing a code suggesting the front catalytic converter is toast. We are up in Canada and (obviously) not subject to the California CARB stuff - how do we go about deleting all of it so that the car becomes a non-CARB spec? What...- 11
- 591
-
Raceland header gasket
ExhaustWhat gasket do I use between the header and cat back? The stock exhaust has that ring gasket and the header does not it leaks really bad- 2
- 2K
-
donnyg20 · updated
-
1.6 Exhaust manifold
ExhaustHi guys
Are there any differences between different 1.6 NA exhaust manifolds?
Ie are all manifolds (OEM, JDM, etc) made of the same metal and do they all have the same bore size?
I plan on grinding/ removing the internal welds to increase flow.
Let me break down the question...- 6
- 488
-
Exhaust size
ExhaustHi guys. Does anyone know or have a formula for calculating the optimum exhaust size? I’m talking exhaust I.D Power gained and just the right back pressure. (There are arguments on whether back pressure is good or bad also) What size ID against the amount of horse power you’re chucking...- 74
- 3K
-
Replace or reuse old exhaust manifold studs?
ExhaustShould these studs be cleaned and reused, or replaced? If replaced, which do you guys recommend?- 2
- 448
Are there any differences between different 1.6 NA exhaust manifolds?
Ie are all manifolds (OEM, JDM, etc) made of the same metal and do they all have the same bore size?
I plan on grinding/ removing the internal welds to increase flow.
Let me break down the question...
Join now to ask and comment!