ClubRoadster.net banner
1 - 5 of 5 Posts

·
Banned
Joined
·
445 Posts
Discussion Starter · #1 ·
next week i want to get my intake-manifold off to polish the intake cambers and grind the welding-craters off and adjust these to the intakes in the head, by that way i am thinking its a good situation to change the gasket with a plastic one. i could get them from ebay, they have them with the egr-holes and without to block off the exhaust gas recirculation

http://tinyurl.com/j6se8

http://tinyurl.com/hjh5h

now my question: is it a good idea to block the egr off or will i have to come in trouble with that modification? and is it worth in relation of taking the heat from the manifold off or does that nothing in celsius or fahrenheit?
 

·
Registered
Joined
·
1,362 Posts
There is some advantage to blocking it off but i forget specifically what it is and if anything else is involved. I saw a thread on exactly this same thing on m.net a few weeks ago(minus the teflon). I would search there.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top