ClubRoadster.net banner
1 - 9 of 9 Posts

·
Supporting Member
Joined
·
375 Posts
Discussion Starter · #1 ·
I have a NB running FMs Ubercharger 3 kit and I'm currently running a 9.5lb pulley which measures a little over 4 inches in diameter. The kit originally came with a 80mm which measures 3 and an 1/8 inches. That pulley was lost by the PO of the SC kit so now I'm on a man hunt. I spoke with Corky on the phone and he no longer has any parts. FM simply put, couldn't give me anything but try someone else. Worse case scenario I have to have one made. Figured I'd try here first. I'm open to any pulley you have for this kit at this point. Id like to run 12/13 lbs but if I can only find a 16/17 lb pulley, looks like I'll push the motor to the limits.

Thanks a bunch!
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top