About to try it... Problem being the NA plates are side-lit, which might make it not so good looking.

I'd like to see someone try it with a bracket/mount from the bottom of the trunklid up underneath the lip of the trunk.

 

I ordered some of these for my bike a while back, now I just gotta find 'em again #-o

http://kuryakyn.com/products.asp?bn=metric&ci=3657

They're LED's encased in the bolt, it's also a security star key for your license plate. You can prolly find some cheaper, but I know for a fact these sumb!tches are bright!

 

Why wouldn´t get some big led's and hook it to the original locations. Normally led works on 3,5V or so. But you can get some with 12V and hook to a stabilizer.

 

If it were only that simple. The bulbs are aimed directly toward the rear of the car and have reflectors to shine the light to the sides toward the plate. All of the LED's ive seen would just project the light straight ahead and none of it would reach the plate.

 

Hummm. I will test if my park light (led) will fit the license light socket

 

Hummm. I will test if my park light (led) will fit the license light socket

I'm sure it will fit, it's just if it will project the light towards the license plate or not enough.

 

Got you point!!! But it didn't work. No ideia wy didn't had power. But my park light (led) are diferente from the other car's, my is the only one i found with this setup, were in Portugal. And the led's are very strong.

But i still didn't abandon this and will get some leds, if it really dosen't work it will be my setup for the interior light's

 

Here are some pics but from a NB

Here is the link of the maker. This is a maker of led light's
http://www.clearcorners.com/products/